| High dirt holding capacity |
Constructed from Borosilicate Microfiber and
polypropylene layers,which enables high dirt
holding capacity
|
| Wide chemical compatibility |
Can be used in the solvent which PH value is
from 1 to 13
|
| High flow rate |
Super flow rate, suitable for colloid and high
viscosity liquid filtration
|
| Economical |
Economical choice for the prefiltration and
guard filtration before critical filtration
|
| Effective Filtration Area |
0.50M2 per 10" |
|
Materials
|
Filter Media: Glass Microfiber |
| PVDF Membrane: Polypropylene |
| Inner core: Polypropylene /SUS304 |
| Outer Support: Polypropylene Cage |
|
Cartridge Dimensions (Nominal)
|
Outer Diameter: 69mm (2.75") |
| Inner Diameter: 33mm (1.30") |
| Length: 10"- 254mm |
| 20"- 508mm |
| 30"-762 mm |
|
40"- 1016mm
* (Length is based on DOE Adapter)
|
|
Cartridge Purity
|
Free of surfactants, resins, binders
and adhesives
|
|
Standard: Clean and flushed with
Pyrogen-free water.
|
| Table 1:Typical air flow rate (10") |
|
| Pore Size |
0.2um, 0.45um, 1.0um, 3.0um |
|
Typical Applications
|
The clarification of beers, wines
and spirits;
|
|
Fine chemicals including reagent,
inks and paints;
|
|
Prefiltraion of biological fluids,
(e.g. cell culture media.)
|
| Clarification of cosmetics. |
| Oilfield completion fluids |
|
Table 2:Liquid Retention
Ratings(um) Test
|
| Cartridge Code |
≥90% |
|
| GF045 |
0.45 |
|
| GF100 |
1 |
|
| GF300 |
3 |
|
| GF500 |
5 |
|
| GF1000 |
10 |
|
|
|
Operating Conditions
|
Normal Operating Temperature: Up to 60℃
(131℉)
|
| Max.Operating Temperature.: 80℃ (172℉)at P≤1.0 bar (14psi) |
|
Max. Differential Pressure: Normal Flow direction
4.2 bar(60 psi) at 25℃ (77℉);
|
|
Reverse flow direction 2.1 bar (30psi)
at 25℃ (77℉).
|
| PH Value compatibility: 1-13 |
|
Sterilization
|
In-line steam sterilization is Not recommended |
|
Flush with hot water at 82℃(180℉) for
30 minutes
|
| Materials Safety |
All the materials are except the Glass Fiber are
certifiedto meet the current FDA and 2002/72/EC
standard.
|
